Extruder & Hotends
-
Save 0% Save %
Mosquito Magnum
Slice EngineeringThe Mosquito Magnum is an innovative hotend and meets our high demands on 3D printer components. It is characterized by ease of use, material resis...
View full details -
Save 0% Save %
Micro V6
FilafarmThe Filafarm Micro V6 Hotend stands for our revised version of the E3D V6. The heat sink and heating block are original E3D components. The design ...
View full details -
Save 0% Save %
Ultimaker 3/S5 Printcore AA
UltimakerUltimaker 3/S5 Printhead/ Printcore AA 0.25mm, 0.4mm or 0.8mm nozzle diameter for easy assembly. This Ultimaker Printcore was designed ex...
View full details -
Save 0% Save %
Ultimaker 3/S5 Printcore BB
UltimakerUltimaker 3/S5 Printhead/ Printcore BB 0.4mm or 0.8mm nozzle diameter for easy assembly. This Ultimaker Printcore was designed exclu...
View full details -
Save 0% Save %
Ultimaker Printcore CC
UltimakerUltimaker S5 Printhead/ Printcore CC with 0.6mm nozzle diameter. Original Ultimaker CC Cores are equipped with an artificial ruby at the nozzle tip...
View full details -
Save 0% Save %
Ultimaker 2+ Nozzle Set
UltimakerThe practical Ultimaker nozzle set consists of 5 nozzles, which are compatible with the Ultimaker 2+ and the Extended + variant. Available are eith...
View full details -
Save up to 0% Save %
Micro Swiss Nozzle, coated
Micro SwissThe coated nozzle by Micro Swiss consists of a 360-brass base material. It is coated with the TwinClad XT nickle composite offering...
View full details -
Save 0% Save %
Olsson Ruby Nozzle
The Olsson RubyThe Ollson Ruby nozzle allows continuous 3D-printing of abrasive filaments and composite materials incl. nano particles, such as carbon f...
View full details -
Save 0% Save %
Micro Swiss Heatbreak, coated
Micro SwissThe coated Heatbreak by Micro Swiss is extremely resistant and has low friction through TwinClad XT coating. Due to the coating, the low resis...
View full details -
Save up to 0% Save %
Capricorn XS PTFE
CapricornCapricorn XS is a brandnew, innovative and specially for 3D printing designed high-end PTFE tube. It is made from pure Japanese resin ...
View full details -
Save up to 0% Save %
Capricorn TL PTFE
CapricornCapricorn TL is a brandnew, innovative and specially for 3D printing designed high-end PTFE tube. It is made from pure Japanese resin, trans...
View full details -
Save 0% Save %
Capricorn PTFE Cutter
CapricornThe Capricorn PTFE Cutter allows you to cut your PTFE and Filaments easy, fast and safely. It is made of a stainless steel blade, a spring and robu...
View full details -
Save 0% Save %
Cartridge Heater
Filafarm12V cartridge heater with 40W power. 24V operation is possible via PWM. Measurements Lenght: 16mm Diameter: 6mm Cable lenght: 1 meter ...
View full details -
Save 0% Save %
Mosquito heating cartridge
Slice EngineeringSlice Engineering heating cartridge for Mosquito Hotend. Bring your hotend to the next level with 50W heating power. The original Molex ™ Mic...
View full details -
Save 0% Save %
Mosquito Thermistor
Slice EngineeringSlice Engineering Thermistor for Mosquito Hotend. Accurate thermistor for use up to 300°C. Molex ™ Micro Fit 3.0 connector for easy and r...
View full details -
Save 0% Save %
Molex - Cable
FilafarmExtension cable for Molex connections (e.g. for thermistor), mechanically crimped on both sides.
-
Save up to 0% Save %
Bondtech Adapter
BondtechBondtech Adapter with integrated push-fit that conforms to the dimensions for the "Groovemount" standard as used by E3D. CNC-milled from black anod...
View full details -
Save 0% Save %
Bondtech Extruder QR Universal Right
BondtechThe Bondtech QR Universal Extruder Right for 1.75mm/ 2.85mm filaments offers highest performance, precision and reliability with its DualDrive gear...
View full details -
Save up to 0% Save %
BMG-M & Mosquito Magnum
Slice EngineeringThe Bondtech BMG-M & Mosquito Magnum is a high end extruder and hotend set by Bondtech (SE) and Slice Engineering (USA) and meets our h...
View full details -
Save 0% Save %
Bondtech Extruder QR Universal Left
BondtechThe Bondtech QR Universal Extruder Left for 1.75mm/ 2.85mm filaments offers highest performance, precision and reliability with its DualDrive gear....
View full details -
Save 0% Save %
Cartridge Heater 90°
Filafarm12V cartridge heater with 90° and 40W power. 24V operation is possible via PWM. MeasurementsLenght: 16mmDiameter: 6mmCable lenght: ...
View full details -
Save up to 0% Save %
Thermistor
FilafarmThermistors in several variants for use with extruders or print beds. Our plug & play variants are trimmed and crimped by machines and also pr...
View full details -
Save 0% Save %
Raise3D Interchangeable Hotend Assembly with V3H Nozzle 0.4mm (Pro3 Serie)
Raise3Dgeeignet für folgende Geräte Raise3D Pro3 Raise3d Pro3 Plus Inklusive 0.4mm Düse beschichtet Typ: [S]5.02.12048A01