?locale=en

Duet Ethernet

Filafarm

Current price
199.90 €
incl. 19% Tax.,
plus shipping costs
167.98 €
net, plus Tax.,
plus shipping costs
* The delivery time refers to a delivery within Germany. The delivery times for other countries and the calculation of the delivery time can be found on our page „Shippingcharges and paymenttherms“.


Duet Ethenet, controller board for 3D-printer, based on 32-Bit ARM Prozessor and 5x TMC2660 stepper driver
This electronic board provides 12V and 24V stepper, heat elements + 3.3V sensors. 
There is no need for an app install, internet connectivity or cloud service to sign up for yet you can control your printer, upload and start prints from the browser. Duet Ethernet does offer a safe, error-free and safe transmission to your 3D printer. The Duex2 and Duex5 daughterboard supports up to 10 stepper. 
PanelDue is a colour touch screen controller for the Duet and other 3dprinting electronics that support it. 

   

Further Addonsfor Duet Wifi and Duet Ethernet:
Expansion Breakout Board
Delta Smart Effector


Advantages

  • Powerful 32 Bit Processor: Atmel SAM4E8E: 120MHz ARM Cortex-M4 microcontroller with floating point unit, 512Kb flash memory, 128Kb RAM and many peripherals.
  • Dedicated Ethernet module: Running on a separate processor, this leaves the main processor free to do precise stepper pulse timing and implement other advanced features.
  • Super quiet TMC2660 stepper drivers: SPI controlled and capable of up to 256 microstepping with optional 16x interpolation when using 16x microstepping. Hardware support for variable microstepping and variable stepper current for optimum speed and power efficiency.
  • On board High speed SD card and support for a second SD external card if required.
  • Dual extruders: 3 heater/thermistor channels for a heated bed and 2 extruders.
  • 3 PWM controllable and 2 always-on fans. These can be run from either the input voltage, from 5V, or from external power for added flexibility.
  • High Power rating: Each stepper driver is capable of 2.8A motor current, currently limited in software to 2A. The bed heater channel is specifically designed for high current (15A+)
  • Connect via PC and ethernet to the on board web interface There is no need for an app install, internet connectivity or cloud service to sign up for yet you can control your printer, upload and start prints from the browser.
  • Setup your printer and update the firmware through the web interface. No need to compile your own firmware.
  • Also connect via USB or serial if desired.
  • Support für bis zu 2 Thermoelemente oder PT100 mit Nebenplatine. (maximal 4 Sensoren) 
  • WPA-2 encryption for network security. The DuetEthernet does not need to be connected to the internet - keep it on a local network for added security.
  • Most printers supported: All common 3D printer geometries are supported, with easily modified configuration templates for popular designs. Along with 3D printers a wide variety of CNC machines and lasercutters can be controlled.
  • Expandable up to 7 extruders: Support for a further 5 stepper drivers and heaters on the expansion header. The Duex2 and Duex5 expansion boards are available.
  • Firmware support for mixing nozzles and remapping axes to use high power external drivers.
  • Advanced Calibration Support: Use an optional add-on of DC42’s highly repeatable contactless IR probe combined with advanced firmware features for more accurate printer calibration. Many other probe types are also supported.
  • Automatic ADC gain calibration for thermistors allows for accurate and repeatable temperature setting. In addition PT100 and Thermocouples are supported through new SPI daughter boards

more information @ Wiki and Duet Wifi Forum.
https://duet3d.com/wiki/Duet_Wiki
https://www.duet3d.com/forum/index.php
https://duet3d.com/wiki/Addon_Hardware_Features
https://www.duet3d.com/forum/thread.php?id=8




See the Hardware overview for more details.

The Duet Ethernet (expected availability early Q2 2017) is identical to the Duet WiFi except that the WiFi module is replaced by an Ethernet module.

Importantly the DuetWifi is Open:


"UK customers should buy from duet3d.com"



Attention!
All necessary connectors are included. The installation of this equipment should only be attempted by a qualified individual. Local electrical codes should be followed (for Germany VDE-policies). Gross M&V (filafarm.de and filafarm.com) are not liable for damages to property or injuries to individuals due to improper wiring or installation of our equipment.